| Step | | Procedure & Parts & Tools |
| 1 |
|
PUSH IN ON THE 2 ORANGE TABS TO REMOVE THE BASE COVER.
|
| 2 |
|
REMOVE THE BASE COVER.
|
| 3 |
|
LOOSEN THE BRUSH HEIGHT KNOB AND REMOVE IT. SET IT ASIDE.
|
| 4 |
|
FLIP THE BASE OVER AND REMOVE THE 5 SCREWS.
| Screwdriver-phillips |
|
|
| 5 |
|
FLIP THE BASE BACK OVER AND REMOVE THE BRUSH MOTOR COVER.
|
| 6 |
|
UNHOOK THE BELT FROM THE BRUSH PULLEY BY REMOVING THE 2 SCREWS HOLDING THE BRUSH MOTOR. TIP MOTOR TO RELEASE PRESSURE FROM BELT. HAND SPIN THE BRUSH PULLEY. IF THE PULLEY SPINS FREELY, THE BRUSH MOTOR IS NOT LOCKED UP.REVERSE STEPS 1 THRU 5 TO REASSEMBLE THE MACHINE.
|